Need an Owner's Manual?

Need help troubleshooting a problem with your Overhead Door garage door opener?

 

Interested in ordering replacement parts for your Overhead Door Garage Door Opener?

Subscribe to our Blog

Your email:

Posts by category

Garage Door Blog

Current Articles | RSS Feed RSS Feed

Programming Overhead Door Remote Controls

 

When you need to program a remote control into an Overhead Door Code Dodger garage door opener manufactured between November 1995 and 1997 there are specific remote controls that can be programmed.

NOT all replacement remote controls will work with Overhead Door Code Dodger garage door openers manufactured between November 1995 and 1997.

Please follow the instructions below to program replacement remote controls for Overhead Door garage door openers manufactured between November 1995 and 1997.

Model OCDTR-3BX (part # 37517R)

OCDTR-3BX Part #37517R                         order-a-new-ocdtr-3bx

Only the button farthest to the right will program to an Overhead Door garage door opener manufactured between November 1995 and 1997.

 

Model OHDT390-BX (part #237503S)

OHDT390-BX (part #37503S)                                  order-a-new-ohdt-390-bx

Only the button in the center will program to an Overhead Door garage door opener manufactured between November 1995 and 1997.

 

Currently, a new design is being implemented into the new 3 button remotes that will allow the top two buttons to be programmed to an Overhead Door Code Dodger garage door opener manufactured between November 1995 and 1997. This is scheduled to be in production by the manufacturer within the next several months.

New Style Remote Control

NGX Overhead Door Remote Control                                order-a-new-remote-control

Overhead Door Company of Northern Kentucky will issue a new blog article when these changes are available.

 

Overhead Door Company of Northern Kentucky is an independently owned and operated distributor of Overhead Door products. We are not the manufacturer.

Detailed programming instructions can be found the owner's manual specific to your model garage door opener. To download the owner's manual for your garage door opener click on the button below

 

download-an-overhead-door-garage-doo

 

To order parts for Overhead Door garage doors and garage door openers, we recommend to visit www.OverheadDoorPartsOnline.com

 

 

Comments

Where are the instructions? 
It says below but there's nothing really. Can't find out if a ODHT390 remote will work with a ODHT390 Genie?
Posted @ Tuesday, December 06, 2011 5:11 PM by Jon
The ODHT390 remote will work with the ODHT390 Genie. Specific programming instructions depend on the model garage door opener you currently have installed. For detailed programming instructions, you can order an owner's manual atwww.OverheadDoorPartsOnline.com.
Posted @ Wednesday, December 07, 2011 7:56 AM by Dave Willmes
I have three garges doors and I want to put all of them onto one remote is there just one that I can add them too.
Posted @ Friday, December 09, 2011 11:40 AM by doron mor
Both #37517R and #23750BS can be programmed up to 3 different Overhead Door Code Dodger or Genie Intellicode garage door openers. 
For more information refer towww.OverheadDoorPartsOnline.com 
 
Posted @ Monday, December 12, 2011 8:37 AM by Dave Willmes
I had 2 of the ohdt390 but i believe someone stole the other 1. How can I reprogram the remote I still have so that the stolen one doesn't work
Posted @ Monday, July 15, 2013 9:25 PM by Stephanie
My remote O3T has failed. Does not open door. 
Lights light up. Do I need to re program it ??? 
It only few months old.
Posted @ Thursday, December 12, 2013 1:37 PM by Rahmat Aziz
If the LED on the remote control lights up when you press the button, I would recommend to re-program the remote control. If that doesn't solve your problem, contact your local Overhead Door distributor to have the remote control replaced by calling 1-800-929-3667. 
 
If the light on the motor lights up but the opener doesn't activate then the problem is not with the remote control but with the motor up in the ceiling. 
 
If this is the case, contact you local Overhead Door distributor.
Posted @ Thursday, December 12, 2013 3:31 PM by Dave Willmes
I have a Overhead Door remote that does not work, I have changed the batterie, but still nothing. The Model number is ACSCT0 Type 1. What do I do?
Posted @ Wednesday, April 09, 2014 6:13 AM by Bill Wren
Trouble shooting a problem with a remote control can be difficult.  
 
The remote control may be malfunctioning and need to be replaced. Replacement remote controls can be ordered online atwww.OverheadDoorPartsOnline.com. 
 
A link is listed below for the remote control that replaces the ACSCT0 Type 1 remote control 
 
http://overheaddoorpartsonline.com/overhead-door-remote-control-37517r-free-shipping/ 
 
The circuit board in the garage door opener motor head may be malfunctioning and not receiving the signal from the remote control. 
 
Replacement circuit boards can also be ordered online atwww.OverheadDoorPartsOnline.com. 
 
The remote control may need to be re-programmed. Refer to the owner's manual for programming instructions. Again owner's manuals for Overhead Door garage door openers can be downloaded at the same website. 
 
However, it may be necessary to contact your local Overhead Door distributor by calling 1-800-929-3667 for technical support.
Posted @ Wednesday, April 09, 2014 7:32 AM by Dave Willmes
Post Comment
Name
 *
Email
 *
Website (optional)
Comment
 *

Allowed tags: <a> link, <b> bold, <i> italics

Proudly servicing Greater Cincinnati and Northern Kentucky

Visit Our Showroom
2571 Ritchie Avenue
Crescent Springs, KY 41017
Office Hours
7:30 a.m. - 4:30 p.m. (M-F)
7:30 a.m. - Noon (Sat)
Phone
(513)347-3667
(859)341-6646