What replacement remote control works with my Overhead Door Python garage door opener?

Read More

Topics: Master Remote Control, Python, Overhead Door, Overhead Door Remote Controls, python opener

Introducing the Overhead Door Master Remote Control!

Are you trying to figure out what remote control will work with your Overhead Door garage door opener?

The answer to this question is simple. The Overhead Door Master Remote.

 

This 3 button remote control is compatible with all Overhead Door and Genie garage door opener products manufactured from 1993 to the present.

 

It is compatible with

* All Overhead Door gated community receivers

* Overhead Door and Genie 912 transmitters

* Overhead Door Code Dodger series I (auto seek dual frequency 315/390 Mhz)

* Genie Intellicode series I (auto seek dual frequency 315/390 Mhz)

* Overhead Door Code Dodger series II (auto seek dual frequency 315/390 Mhz)

 

The Overhead Door Master Remote Control features

* 3 large, easy to find buttons

* LED indicators

* Simple programming for all models of use

* Easily mounts to the car visor

* Uses the CR2032 coin cell battery

* Visor clip and programming instructions are included

 

To order an Overhead Door Master Remote Control is also simple. Click below.

 

Please note that the overhead Door Master Remote Control will not work with garage door openers manufactured prior to 1993. If your Overhead Door garage door opener and remote control operate at a radio frequency other than 390Mhz, the Overhead Door Remote Control will not work.

If your Overhead Door garage door opener and remote control operate at frequencies such as 360Mhz, 380Mhz, 312Mhz or 412Mhz then you will need to order a different style of remote controls. A complete selection of Overhead Door remote controls are available at www.OverheadDoorPartsOnline.com.

To view all Overhead Door remote controls, click below.

 

 

Overhead Door Company of Northern Kentucky is a second generation family owned company that provides residential and commercial garage doors, automatic openers, dock equipment, commercial steel entry doors and retractable awnings to the Greater Cincinnati and Northern Kentucky communities. Overhead Door Company of Northern Kentucky has been a proud distributor of Overhead Door products for 65 years.

If you are located in Greater Cincinnati or Northern Kentucky and need an IDA certified garage door technician to repair your garage door click here to schedule an appointment

If you are located in Greater Cincinnati or Northern Kentucky and need information about scheduling an annual maintenance inspection, click here.

To order replacement Overhead Door garage door parts go to our online parts store at www.OverheadDoorPartsOnline.com.

For more information about Overhead Door Company of Northern Kentucky visit our website at www.OverheadDoorOnline.com.

 

Read More

Topics: 37345R, om3t-bx, 761825018693, Master Remote Control, Universal Remote Control, Overhead Door, Overhead Door Remote Controls

Many of our customers have cars with remote controls built into their dashboard. As a result, they want this built-in remote control to be programmed to open and close their garage door.  Programming your car is a simple process if you follow the steps outlined below:

First, please note that you must have a hand-held remote control already programmed to open/close your garage door. This hand-held remote control will be used to program your car. If you do not have a hand-held remote control, please refer to our online parts store at www.OverheadDoorPartsOnline.com. We offer a complete selection of remote controls that will work with any Overhead Door or Genie garage door opener.

Second, some vehicles may require the ignition be turned on or the vehicle actually running to program the Homelink^® transceiver.

To program a rolling code (i.e. CodeDodger or Intellicode) compatible Homelink^® system, please follow these steps.

1. Press and hold the two outside buttons on the Homelink^® system until the LED starts to blink, release buttons

2. Press and hold the desired Homelink^® button and the transmit button on your rolling code transmitter at the same time until the Homelink^® LED changes from a slow blink to a rapid blink. (Your Homelink^® system is now programmed)

3. Locate the learn code button on your garage door opener. (These are located under the light cover or on the rear panel depending on model)

4. Press the learn code button on the garage door opener, a red LED will start to blink. (You will have 30 seconds to complete programming)

5. While the LED on the garage door opener is blinking, return to the vehicle and press the pre-programmed Homelink^® button 4 times. (Or until the garage door operates).

 

We always recommend for you to refer the vehicle's owner's manual for more detailed programming instruction. Many automobile manufacturers may have slight variations in the programming instructions that are not outlined above.

If you have problems with the Homelink^® system please call 1-800-355-3515 or their website at http://www.homelink.com/home

Homelink^® is a registered trademark of Johnson Controls, Inc.

 

Overhead Door Company of Northern Kentucky is a second generation family owned company that provides residential and commercial garage doors, automatic openers, dock equipment, commercial steel entry doors and retractable awnings to the Greater Cincinnati and Northern Kentucky communities. Overhead Door Company of Northern Kentucky has been a proud distributor of Overhead Door products for 65 years.

If you are located in Greater Cincinnati or Northern Kentucky and need an IDA certified garage door technician to repair your garage door click here to schedule an appointment

If you are located in Greater Cincinnati or Northern Kentucky and need information about scheduling an annual maintenance inspection, click here.

To order replacement Overhead Door garage door parts go to our online parts store at www.OverheadDoorPartsOnline.com.

For more information about Overhead Door Company of Northern Kentucky visit our website at www.OverheadDoorOnline.com.

 

Read More

Topics: Homelink, Car 2 U, Overhead Door, Overhead Door Remote Controls, 4040XL, 4040, SilentMax 4040, homelink system

Topics: garage door maintenance, overhead door service, overhead door maintenance, Overhead Door, Overhead Door Company of Northern Kentucky, perimeter seals

Overhead Door Corporation has discontinued the four (4) button, Code Dodger key chain remote control (transmitter).

Read More

Topics: OCD390-4, 36292S, Overhead Door, Overhead Door Company of Northern Kentucky, Overhead Door Remote Controls

I just bought this universal remote control and I can’t get it to program into my Overhead Door garage door opener. What am I doing wrong?

Read More

Topics: Overhead Door garage door openers, Overhead Door, Overhead Door Company of Northern Kentucky, Overhead Door Remote Controls

You depend on your garage door.  However, you probably don’t give it a thought . . . until it doesn’t go up or down. 

Read More

Topics: garage door service, garage door maintenance, overhead door maintenance, Overhead Door

Read More

Topics: Durafirm Model #870, Overhead Door, Overhead Door Company of Northern Kentucky

  

 

Read More

Topics: Overhead Door Rebates, Garage Door and Garage Door Opener Rebates, Overhead Door garage door openers, Overhead Door, Overhead Door Destiny 1500, Overhead Door Destiny 1200

Read More

Topics: International Door Association, Overhead Door, Overhead Door Company of Northern Kentucky